What problems are prone during use

  • What problems are prone to occurring in the use of INDISTRIAD THREAD TWISTING MACHINE. As a glass fiber INDUSTRIAD TWIRAD TWISTING MACHINE manufacturer, what problems are prone to occur in the process of use!

    1. We know that the stability of the drawing speed is a very critical influencing factor for the quality of drawing. When INDUSTRIAL THREAD TWISTING MACHINE operates, I am afraid that the situation that we do not want to see is that the brushes are unstable, fast and slow, which causes interruption and irregular changes. This happens, which is generally caused by two reasons. In fact, the problem with any parts of any components of IndusRial Thread Twisting Machine will affect the drawing effect. If the copper wire trembles on the annealing wheel, this will occur, because the copper wire is tightened when the time is loose, so the surface of the copper wire cannot be consistent.

    2. In addition, there is another reason. Because under the premise of long -term operations, the wear of the device is inevitable that if the gearbox of the main electrode box of the main electrical machine of Industrial Thread Twisting Machine, it will not match the speed, traction speed, and closing speed of the drawing. It will form a single silk.

    3. There is another situation. If the IndusStiral Thread Twisting Machine has changed in the operation, it will change, and it will also cause this phenomenon. This is because the tension on the storage wheel is unstable. If you are chasing the roots, the air pressure of the air pump is still indertourial thread twisting machine air pump.

    Industrial Thread Twisting MachineINDISTRIAL Thread Twisting Machine

    What problems are prone to occurring in the use of INDISTRIAD THREAD TWISTING MACHINE. As a glass fiber INDUSTRIAD TWIRAD TWISTING MACHINE manufacturer, what problems are prone to occur in the process of use!

    1. We know that the stability of the drawing speed is a very critical influencing factor for the quality of drawing. When INDUSTRIAL THREAD TWISTING MACHINE operates, I am afraid that the situation that we do not want to see is that the brushes are unstable, fast and slow, which causes interruption and irregular changes. This happens, which is generally caused by two reasons. In fact, the problem with any parts of any components of IndusRial Thread Twisting Machine will affect the drawing effect. If the copper wire trembles on the annealing wheel, this will occur, because the copper wire is tightened when the time is loose, so the surface of the copper wire cannot be consistent.

    2. In addition, there is another reason. Because under the premise of long -term operations, the wear of the device is inevitable that if the gearbox of the main electrode box of the main electrical machine of Industrial Thread Twisting Machine, it will not match the speed, traction speed, and closing speed of the drawing. It will form a single silk.

    3. There is another situation. If the IndusStiral Thread Twisting Machine has changed in the operation, it will change, and it will also cause this phenomenon. This is because the tension on the storage wheel is unstable. If you are chasing the roots, the air pressure of the air pump is still indertourial thread twisting machine air pump.

    industrial thread twisting machine https://www.newheli.com/inseparable-from-the-easy-to-use-twisting-machine.html